Inserting Batteries In The Remote Control - Grundig VISION 2 16-2830 T Manual

8
CONNECTION/PREPARATION

Inserting batteries in the remote control

1
Open the battery compartment by removing the lid.
2
Insert the batteries (micro type, for example R03 or AAA,
2x1,5V). Observe the polarity (marked on the base of the battery
compartment).
3
Close the battery compartment.
Note:
If the television no longer reacts properly to remote control
commands, the batteries may be flat. Be sure to remove used
batteries.
The manufacturer accepts no liability for damage re sulting from
used batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not
be disposed of with household waste. Please dispose of used
batteries in an environmentally sound manner. Find out about the
legal regulations which apply in your area.
----------------------