9. "AUTO" mode
9.5
Switching the program
If the program displayed on the screen is not the one you want to execute, it can be
switched to another program.
n
NOTE
The output is reset when the program is switched. However, the output will
not be reset in the following cases:
1. "DO cond. on PGM reset / RESCDO" in Other parameters is set to "HOLD".
Chapter
4
2. A sequence program is being executed without enabling the DO reset in
[Procedure]
1) Press
Program information appears. A pointer is displayed on the line number of the
program which is currently selected.
2) Use the cursor ( ↑ / ↓ ) keys to select the desired program and press
The selected program will automatically be compiled and an object program file
made.
■ Switching programs
AUTO
4-38
(For details, see "13. DO cond. on PGM reset / RESCDO" in "12.1.4 Other
parameters".)
the sequence execution flag setting.
(DIR) in "AUTO" mode.
>DIR
No.
NAME
LINE
1
TEST1
13
2
TEST2
50
3
PARTS100
38
4
TEST3
[T1] 100% <TEST2
BYTE
RW/RO
125
RW
608
RW
411
RW
7
78
RW
.
>