Exchange Radio Gateway - Siemens FDCW221 Technical Manual

Radio gateway

Hide thumbs Also See for FDCW221:

Table of Contents

Maintenance / Troubleshooting

9.7

Exchange radio gateway

Building Technologies

Fire Safety & Security Systems

RadioSpy should be preferrably used to exchange a radio gateway. This way, the

configuration of all radio detectors can be adopted.

Take into account the pin assignment of the line cables when a radio gateway is exchanged.

When the line cables are inverted, a topology error is the result.

Prerequisite

The FDnet detector line must be switched off.

Procedure when using RadioSpy:

1. For the required steps please consult the RadioSpy User Manual A24205-A337-

H897.

2. The radio gateway automatically synchronizes its data with the radio detectors.

Observe the complete process with RadioSpy or wait for 10 minutes until the

data is completely synchroinzed.

3. Switch the FDnet detector line back on.

4. Select 'Accept replaced devices' on the control panel.

Procedure without RadioSpy

The radio gateway must be completely reconfigured after the replacement.