Table of Contents
Advertisement
4 Supported Gateways
4.1 HG 3500 V4 (Common Gateway)
A31003-H3150-S104-2-7620, 03/2009
HiPath 4000 V5, IP Solutions - HG 3500 & HG 3575, Service Documentation
The following gateways are supported in HiPath 4000 V5.
HG 3500 V4 is supported with the following boards:
•
STMI2 (Q2316-X and Q2316-X10)
•
STMI4 (Q2324-X500 and Q2324-X510)
4.1.1 General Information
•
The common gateway HG 3500 V4 consolidates existing VoIP gateways into
a single gateway.
•
The ommon gateway HG 3500 V4 forms a common architecture for HiPath
4000 V4 and higher based on HG 3550 V2.0 (for HiPath 4000 V3.0).
•
All functions provided by the HG 3530, HG 3540, HG 3550 and HG 3570
gateways, including redundancy and load sharing, are retained.
•
Support ofthe "mixed" common gateway. This means that all sub features
(trunking, VoIP subscriber, IPDA and WAML) can be used in parallel on a
board (Multiple Feature Support (MFS)). The gateway can also be used as
Single Feature Configuration (as known from HiPath 4000 V3.0).
Configuration example for Multiple Feature Support: see
Feature Support Configuration at the Common Gateway
Examples of single feature configuration can be found in the documents:
•
HiPath Feature Access (HFA)
•
IP Distributed Architecture (IPDA) and Access Point Emergency (APE)
•
SIP-Q-Trunking / Native SIP trunking or H323-/H323-Annex-trunking
IMPORTANT: Restriction: Only one trunking protocol may be configured for
each board. There are no restrictions on interworking with other functions.
•
The HiPath Feature Access (HFA) standby concept will be made available for
other functions.
gateways_04_overview.fm
Supported Gateways
HG 3500 V4 (Common Gateway)
Section , "Multiple
(Example)".
41
Advertisement
Table of Contents
