Index - Genius falcon m User Manual

1. DESCRIPTION AND TECHNICAL SPECIFICATIONS
2. DIMENSIONS
3. MAXIMUM USE CURVE
4. ELECTRONIC DEVICES (standard system)
5. INSTALLING THE AUTOMATED SYSTEM
5.1. PRELIMINARY CHECKS
5.2. MASONRY FOR FOUNDATION PLATE
5.3. MECHANICAL INSTALLATION
5.4. INSTALLING THE RACK
6. START-UP
6.1. CONNECTION OF CONTROL BOARD
6.2. POSITIONING THE TRAVEL-LIMIT ELEMENTS
7. AUTOMATED SYSTEM TEST
8. MANUAL OPERATION
9. RESTORING NORMAL OPERATION MODE
10. SPECIAL APPLICATIONS
11. MAINTENANCE
12. REPAIRS
13. ACCESSORIES
Manufacturer: GENIUS S.p.A.
Via Padre Elzi, 32 - 24050 - Grassobbio- Bergamo - ITALY
Address:
Declares that: Operator mod. FALCON M
• is built to be incorporated in a machine or to be assembled with other machinery to create a machine under the provisions of Directive 98/37/EC;
• conforms to the essential safety requirements of the other following EEC directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Furthermore, the manufacturer declares that the machinery must not be put into service until the machine into which it will be incorporated or of which
it will become a part has been identified and its conformity to the conditions of Directive 98/37/EC has been declared.
Grassobbio, 10-11-2006
The symbol indicates notes that are important for the safety of persons and for the good condition of the automated system.
The symbol

INDEX

CE DECLARATION OF CONFORMITY
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
draws your attention to the notes on the characteristics and operation of the product.
Managing Director
D. Gianantoni
6
page.7
page.7
page.7
page.7
page.8
page.8
page.8
page.8
page.8
page.9
page.9
page.9
page.10
page.10
page.10
page.10
page.10
page.10
page.10