Setting Custom Size - Konica Minolta bizhub 226 User Manual

4
4.4.2

Setting Custom Size

Any size that is not listed in the paper size list must be registered as a custom size.
1
On the [Setup] tab, click [Edit Custom...].
The paper registration dialog box appears.
2
Click [New].
The dialog box expands and the paper setting items are displayed.
3
Enter the paper name in [Name].
4
Specify the width and length of the paper in [Dimensions].
% The unit system can be changed in [Unit].
5
Click [OK] at the lower right of the dialog box.
The paper setting items in the dialog box collapse.
6
Click [OK].
This saves the custom size, which can be selected from the paper size list.
Tips
- To change the width and length of the registered custom size, select the target paper, then click [Edit].
You cannot change the name.
- To delete the registered custom size, select the target paper then click [Delete].
- You can enter the registration name using up to 20 characters.
- Up to 32 custom sizes can be registered.
4-10
[Setup] tab 4.4
bizhub 226