Manually Installing The Printer Driver (For Windows); Checking The Connection Method - Konica Minolta bizhub 226 User Manual

10
10.2

Manually Installing the Printer Driver (for Windows)

10.2.1

Checking the connection method

The installation method for the printer driver differs depending on the method used to connect this machine
to the computer. This machine can be connected via a network or a USB interface. When this machine is
connected to the network, there are several printing protocols. The installation method for the printer driver
also differs depending on the protocol. For network connection, optional Image Controller IC-209 or Net-
work Card NC-504 is required.
Installation method
Connection method in
which setup is possible
using Add Printer Wiz-
ard
Connection method in
which plug and play-
based setup is possible
10-4
Manually Installing the Printer Driver (for Windows)
Connection method
LPR A network connection using the LPR (Line Printer Re-
mote) print service. It uses a TCP/IP protocol and the
LPR printing port.
• For the installation procedure, refer to page 10-5.
Port 9100 A network connection using the PORT9100 print service.
It uses a TCP/IP protocol and the RAW printing port.
• For the installation procedure, refer to page 10-5.
IPP A network connection using the IPP (Internet Printing
Protocol) print service. Printing can be carried out via the
Internet using the HTTP (HyperText Transfer Protocol) of
the TCP/IP protocol.
• For the installation procedure, refer to page 10-9.
Web service print It is a connection corresponding to Web service function
and capable of automatically detecting the printer on the
network.
• For the installation procedure, refer to page 10-7.
USB A connection using a USB port.
USB A connection using a USB port.
• For the installation procedure, refer to page 10-12.
10.2
bizhub 226