Send All Calls; Enabling And Disabling The Call Timer - Avaya 9608 User Manual

Standard Call-Related Features

Send All Calls

About this task
When Send All Calls (SAC) feature is on, your incoming calls go directly to a predefined
coverage number, typically your voicemail. Incoming calls ring once at your extension and then
go directly to a number which is set by your system administrator. If the SAC feature is
administered on your phone, a Send All softkey appears on the Phone screen for idle calls.
Pressing Send All turns Send All Calls on. If it is already on, pressing Send All turns it off.
You can also turn Send All Calls on or off by using the telephone Features list.
Procedure
1. From the Phone screen, scroll right to access the Features menu.
2. Select Send All Calls.
3. Press Select or OK to turn Send All Calls on or off.

Enabling and disabling the call timer

If your administrator has enabled the call timer feature for your deskphone, you can turn on
the call timer to keep a track of the duration of your calls. A softkey labeled Timer On appears
on the display screen when you are on a call.
Procedure
1. Press the Timer On softkey to start the timer.
2. Press the Timer Off softkey to stop the timer.
48 Using Avaya IP Deskphone H.323 9608, 9608G, and 9611G
The Timer is displayed on the Status Line that is the second from the top and
increases each second until 59:59 is reached, at which point the timer stops.
This action also changes the softkey label back to Timer On. The timer is removed
from the display five seconds after you turn the timer off.
Comments? infodev@avaya.com
January 2014