Configuration 1 - InFocus INF6502WB User Manual

Configuration 1

Language: switches the OSD menu language.
Auto Source: When enabled, automatically searches for an active source. If no source is detected, the device will revert
to the previously active source. If Auto Source is disabled, the device will stay on the last selected source regardless of
whether an active source is detected or not. Options: Yes and No (default).
USB Hub Switch: allows the user to use the embedded Lightcast module exclusively, the touch functions from an input
source exclusively, or to allow the monitor to switch automatically depending on whether input source is connected or
not. Options: Auto (default), Lightcast, and External.
Configuration Reset: resets all Configuration 1 and Configuration 2 menu items to factory default settings. Options: Yes
and No.
Factory Reset: resets all menu items to factory default settings. Options: Yes and No.
Page 32
CONFIGURATION 1
LANGUAGE
AUTO SOURCE
USB HUB SWITCH
CONFIGURATION RESET
FACTORY RESET
< >
Sel Adjust Enter
ENGLISH
NO
AUTO
NO
NO
Back Quit