Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for InFocus INF6500
Summary of Contents for InFocus INF6500
- Page 1 USER GUIDE INF6500E 009-1653-00...
-
Page 2: Table Of Contents
CONTENTS Declaration of Conformity ..............................3 Safety Considerations .................................4 安全資訊 ....................................5 What’s Included ..................................7 Setup ....................................8 Mounting ..................................8 Connecting to other devices ............................9 Connecting AC power ..............................12 External PC touchscreen control setup ........................12 Turning the Monitor On/Off ...............................12 Using the Remote ................................13 Using the Keypad ................................15 OSD (On-Screen Display) Menu System ...........................16 Picture ..................................17... -
Page 3: Declaration Of Conformity
Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. SRS TruSurround HD and SRS TruVolume are trademarks of SRS Labs, Inc. TruSurround HD and TruVolume technologies are incorporated under license from SRS Labs, Inc. InFocus, In Focus, INFOCUS (stylized), MondoCenter, Mondopad, BigTouch, and JTouch are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries. -
Page 4: Safety Considerations
SAFETY CONSIDERATIONS Please read and follow all safety instructions provided below and on the monitor before connecting the monitor to a power source. Failure to comply with safety instructions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by the equipment. -
Page 5: 安全資訊
• Refer all service to qualified service personnel. Do not remove the cover or back. Servicing your own monitor can be dangerous to you and will void the warranty. • Only use replacement parts specified by InFocus. Unauthorized substitutions may result in fire, electrical shock or injury and may void the warranty. - Page 6 • 防止踩踏或擠壓電源線，尤其是電源插頭、插座以及在顯示幕上的出入點。 • 如果您長時間不打算使用顯示器，請拔掉顯示器插頭。 • 如果您需要使用附帶的超細纖維清潔布進行清潔，請拔掉顯示器插頭。電源關閉時，可使用清潔布擦拭螢幕。切勿在顯 示器上使用酒精、溶劑或含氨 液體。 • 操作顯示器附帶的線纜後需要洗手。 • 顯示器遙控器利用電池工作。一些型號在發運時還附有採用電池工作的滑鼠和鍵盤。請確保電池極性 (+/-) 正確對齊。按 照當地廢棄物品處理法規處理 廢舊電池。 • 僅使用符合此產品規格的適當耐火等級牆和支架安裝硬體，並遵守製造商的安裝指示。由額定安裝硬體使用不當或安裝 不當造成的任何損壞均不在保 修範圍內。 • 請向專業維修人員諮詢所有維修資訊。請勿卸下封蓋或封底。自行維修顯示器不僅會對您造成傷害，而且也會使保修失 效。 • 僅使用 InFocus 指定的更換零件。未經授權進行更換可能會造成火災、電擊或人身傷害，並可能使保修失效。 • 將顯示器安裝到牆上時，必須使用 8 枚公制（12 毫米）螺絲。此外，安裝介面應符合北美地區的 UL1678 標準。安裝方 法應結實牢固，足以承受顯 示器的重量（參見產品技術規格）。 • 遵守這些指示有助於確保使用壽命內顯示器的圖像品質。不遵守這些指示可能會影響保修。 Page 6...
-
Page 7: What's Included
Power cord (varies per country) Warranty Quick Start Guide Remote control Documentation (batteries not included) For additional accessory options, such as stands, feet, carts and wall mounts, see the InFocus website (www.infocus.com/store) or your local dealer. INF6500e User Guide Page 7... -
Page 8: Setup
SETUP Mounting This product does not ship with mounting accessories. Only use commercially manufactured mounting accessories which meet this product's specifications and follow the manufacturer installation instructions. • Only use properly rated wall and stand mounting hardware that meet this product’s specifications and follow the manufacturer installation instructions. -
Page 9: Connecting To Other Devices
Connecting to other devices A full range of digital and analog video inputs and audio source devices can be connected to the connection panels on the front, back, and side of the monitor. Available jacks include: HDMI In (5), PC In (1), Composite Video (1), Component RCA (1), RS232 (1), Audio In 3.5mm (1), Audio In RCA (1-R/L), USB-A for touch control (1), USB 2.0-A (3), and Audio Out RCA (1-R/L). - Page 10 Connect an HDMI cable from the monitor to an HDMI external device (such as a HDMI 5 VCR or DVD player). Requires optional PC module. Connect a Type A to Type B USB cable from the PC USB display to an external hard drive or other similar peripheral. Connect a USB thumb drive to this USB Type A 2.0 connector.
- Page 11 Connect a component RCA video cable from the monitor to an external device COMPONENT (such as a DVD player, HDTV device, or Laser Disc player) (YPbPr) signals. Connect a VGA computer cable from the monitor to an external computer. Connect an HDMI cable from the monitor to an HDMI external device (such as a HDMI1 - 4 VCR or DVD player).
-
Page 12: Connecting Ac Power
Connecting AC power Connect one end of the AC power cord to the AC In jack on the back of the monitor. Connect the other end of the AC power cord to an AC outlet. Toggle the power switch to the ON position. Press the power switch. -
Page 13: Using The Remote
USING THE REMOTE The remote uses two (2) AAA batteries (not included). Install the batteries by removing the cover from the remote’s back, aligning the + and – ends of the batteries, sliding them in place and replacing the cover. To operate, point the remote at the monitor sensor at the bottom right-hand corner of the monitor. - Page 14 Remote buttons Power: Switches the power on or puts the monitor into Standby. POWER Home: Changes the active source back to the embedded PC. HOME Input: Toggles the Input Source menu on and off, which allows the user to INPUT change sources.
-
Page 15: Using The Keypad
Blank: Toggles between the source and a blank black screen. Dimming: Adjusts brightness level. USING THE KEYPAD The keypad, located on the front of the monitor, has the following buttons: Source Power button: • If a PC box is not installed, the button switches the power on or puts the monitor into standby. • If a PC box is installed, the button will switch power on or off when the button is depressed for less than four seconds. -
Page 16: Osd (On-Screen Display) Menu System
OSD (ON-SCREEN DISPLAY) MENU SYSTEM The OSD provides the user the ability to control the monitor display. To access the OSD, press the Menu button on the remote or the keypad located on the right-hand side of the monitor. Use the up and down arrows on the remote or keypad to scroll through the menu options and press OK to enter the highlighted menu. -
Page 17: Picture
Picture PICTURE BRIGHTNESS CONTRAST SHARPNESS NATIVE COLOR TEMPERATURE COLOR CONTROL GREEN BLUE STANDARD PICTURE MODE PICTURE RESET < > Adjust Enter Back Quit Brightness: changes the intensity of the image. Range: 0-100. (Default 70.) Contrast: controls the degree of difference between the lightest and darkest parts of the picture and changes the amount of black and white in the image. -
Page 18: Screen
Screen SCREEN H POSITION V POSITION CLOCK CLOCK PHASE BLANK DIMMING ASPECT RATIO WIDE SCREEN RESET < > Adjust Enter Back Quit H Position: adjusts the horizontal position of the image. Range: 0-100. (Default 50.) V Position: adjusts the vertical position of the image. Range: 0-100. (Default 50.) Clock: adjusts the width of the image (For VGA input only). -
Page 19: Audio
Audio AUDIO SPEAKER INTERNAL AUDIO SOURCE MONDOPAD AUDIO RESET < > Adjust Enter Back Quit Speaker: controls whether both the internal and external speakers (sound bar, etc.) or just external speakers are used. Options include: Internal (both internal and external speakers operate) and External (only external speakers operate). Default Internal. -
Page 20: Pip
PIP MODE PIP INPUT PIP POSITION TOP-RIGHT PIP SWAP PIP SIZE SMALL PIP AUDIO MAIN PIP RESET < > Adjust Enter Back Quit PIP Mode: enables or disables Picture-in-Picture mode. Options include: Yes and No. PiP Input: selects the source input for the PiP window. Options include: Video, component, VGA, HDMI1, HDMI2, HDMI3, HDMI4, LightCast. -
Page 21: Configuration 1
Configuration 1 CONFIGURATION 1 LANGUAGE ENGLISH AUTO SOURCE USB HUB SWITCH AUTO CONFIGURATION RESET FACTORY RESET < > Adjust Enter Back Quit Language: switches the OSD menu language. Auto Source: When enabled, automatically searches for an active source. If no source is detected, the device will revert to the previously active source. -
Page 22: Configuration 2
Configuration 2 CONFIGURATION 2 OSD TURN OFF FREEZE OSD H POSITION OSD V POSITION OSD ROTATION PORTRAIT MONITOR INFORMATION < > Adjust Enter Back Quit OSD Turn Off: controls how many seconds the OSD menu remains on the screen Range: 5-120 (seconds). (Default: 10) Freeze: When enabled, freezes the image which is currently displayed. -
Page 23: Advanced Option
Advanced option ADVANCED OPTION GAMMA SELECTION MODE1 OVER SCAN IR CONTROL NORMAL KEYPAD CONTROL LOCK DDC/CI LIGHT SENSOR ADVANCED OPTION RESET < > Adjust Enter Back Quit Gamma Selection: adjusts the gamma value of the image and optimizes image brightness and contrast. Options include: Mode 1, Mode 2, Mode 3. -
Page 24: Troubleshooting
TROUBLESHOOTING SYMPTOM POSSIBLE SOLUTIONS No power • Verify the power cord is properly connected to the power outlet and to the monitor. • Verify the power switch is ON and that the Power button on the remote or keypad has been turned on (the front LED should be green). • Plug another electrical device to the power outlet to verify that the outlet is supplying the proper voltage. - Page 25 3) Plug another electrical device to the power outlet to verify that the outlet is supplying the proper voltage. For additional troubleshooting support, please contact: InFocus Corporation - Technical Support 6am-5pm PST 877-388-8385 www.infocus.com/support...
-
Page 26: Limited Warranty
If a hardware defect arises and a valid claim is received within the Warranty Period, at its option and to the extent permitted by law, InFocus will either (1) repair the hardware defect at no charge, using new parts or refurbished... - Page 27 (l) if the product is not used under normal operating conditions which are defined as use not in excess of 16 hours continuously per day with a minimum 8 hour period of continuous rest in the powered off state; or (m) if any InFocus serial number has been removed or defaced.
- Page 28 InFocus will provide it. You must assist in diagnosing issues with your product and follow InFocus’s warranty processes. InFocus may restrict service to the country where InFocus or its Authorized Distributors originally sold the hardware product. InFocus will provide warranty service either (i) at an ASP location, where service is performed at the Page 28...
- Page 29 If during the diagnosis period, InFocus identifies that the repair can be accomplished by the use of a CSR part, InFocus will ship that part directly to you for replacement. There are two categories of CSR parts: • Parts for which customer self repair is mandatory. ...
- Page 30 InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, OR 97223-8368 USA © 2016 InFocus Corp. All rights reserved. InFocus and the InFocus logo are trademarks of InFocus Corp., registered in the U.S. and other countries.
-
Page 31: 安全注意事項
安全注意事項 在將顯示器連接到電源之前，請仔細閱讀並遵守顯示器上提供的下述安全說明。如不遵守安全說明則可能導致火災、觸電或 人身傷害，並可能損壞或 損害對設備所提供的保護。 請妥善保存所有安全說明。 • 這種顯示器是非常沉重的，應由至少兩個人進行搬動和安裝。不要試圖自行搬動或安裝顯示器，否則可能造成傷害和/ 或損害。 • 搬動顯示器時，利用手柄和側板或底板始終牢固地把持住顯示器。不要把持頂板。 • 在搬動顯示器紙箱時，不要傾斜或倒置紙箱。始終將其保持在豎直方向。 • 在移動顯示器前，請斷開所有配件和電纜。 • 如果顯示器安裝在牆上，顯示器與牆壁之間的距離至少保持為 1.98 英寸（5釐米），以提供足夠的通風。 • 請參閱正確的開機和關機程式方面的指南。 • 遵循本手冊和顯示器上的所有警告和注意事項。 • 顯示器的安放位置遠離加熱和冷卻通風孔至少 4 英尺（1.2米）。 • 請勿堵塞通風口。顯示器放在通風良好且不阻礙進氣口和排氣口的地方。 • 不要在諸如散熱器、熱記錄器、火爐或其他發熱設備（包括放大器）等熱源附近安裝或使用顯示器或揚聲器。 • 不要將顯示器放置在陽光直射、潮濕、油膩或灰塵較多的地方，或顯示器可能接觸到雨水、煙霧或蒸汽的地方。 • 顯示器使用的電源線不應該靠近水，例如靠近浴缸、洗臉盆、廚房水槽、游泳池等。 • 不要在靠近水的地方使用顯示器的任何元件，包括揚聲器。警告：為減少火災或觸電的危險，請勿將本設備和該設備的 任何元件淋雨或受潮。 • 請勿摔落顯示器。 • 不要將液體灑在顯示器上。濺落的液體可能損壞顯示器。... -
Page 32: Jtouch 65"顯示器I/O Port 介紹前/後面板
JTouch 65”顯示器I/O port 介紹前/後面板 Source Page 32... - Page 33 接收外部裝置的HDMI信號。 HDMI 5 需要可選 PC 模組。從顯示到外部硬碟或其他類似的週邊設備連接到 B 型 USB 電纜 PC USB 的 A 型。 連接無線鼠標、U盤等其他連接USB Type-A的設備，兼容USB2.0。 SOURCE USB 連接無線鼠標、U盤等其他連接USB Type-A的設備，兼容USB2.0。 SOURCE USB 將USB纜線從顯示器連接至外部電腦，以便使用觸控模組。 通过 USB 线缆，将另一 TOUCH USB 台Monitor的触控模组分享至该设备，实现双触控功能. 電源開關 打開和關閉切換電源。 輸入功率 將電源線連接到輸入電源和電源插座。 接收來自外部裝置（例如DVD播放器,HDTV裝置或雷射光碟播放器）的色差視訊 COMPONENT (YPbpr)訊號。 接收來自外部裝置（例如電腦）的類比RGB訊號。 接收外部裝置的HDMI信號。 HDMI1 - 4 將複合視頻電纜從監視器連接到外部設備...
- Page 34 通過遠程操作控制設備。 RS232 PC AUDIO 連接 PC 模組的音訊源中的一行。 LINE IN 接收來自外部裝置（例如iPod播放器）所發出的音頻訊號。 AUDIO IN1 接收來自外部裝置（例如DVD播放器）所發出的音頻訊號。 AUDIO IN2 AUDIO OUT 連接到外接式立體聲喇叭。 開啟或關閉顯示器。 選取/確認屏幕顯示(OSD) 功能表中的選項。 在OSD 功能表中向上捲動瀏覽各個設定和選項。 在OSD 功能表中向下捲動瀏覽各個設定和選項。 在OSD 功能表中向左捲動瀏覽各個設定和選項。 在OSD 功能表中向右捲動瀏覽各個設定和選項。 開啟或關閉OSD 功能表。 Page 34...