Table of Contents
Advertisement
TG5871AL.book Page 74 Friday, June 17, 2005 7:01 PM
Useful Information
Error messages
If the unit detects a problem, one of the following messages will be displayed on the
handset.
Display message
Busy
Denied
Dial locked
Error!!
Error!!
All handsets
registered.
Maximum is 8.
74
Cause & solution
L The called handset or base unit is in use.
L Privacy mode is on for the call you tried to join (page
22).
L The handset you tried to copy phonebook items to is in
use.
L The handset you are calling is too far from the base unit.
L The room monitor feature is turned off on the
destination handset or base unit and the room cannot
be monitored (page 41).
L The called handset is on the base unit. The handset
must be off the base unit to be monitored.
L Dial lock is turned on. To turn it off, see page 52.
L When you tried to register or deregister the handset, the
handset and the base unit could not link for some
reason, such as interference from electrical appliances.
Move the handset and the base unit away from the
electrical appliances and try again.
L If more than one handset is in use, you may not be able
to register/deregister. Try again later.
L Another handset tried to send phonebook items to you
but there was an error. Have the other handset user re-
send the items to you (page 29).
L The entered password was wrong in programming dial
lock. Enter the correct password.
L 8 handsets have already been registered to the base
unit. To cancel a handset's registration, see page 58.
L You may have registered one of your handsets to
another base unit without deleting its registration to this
base unit. Erase the handset's registration from the
base unit.
Base unit:
(1) Press and hold {INTERCOM} until the CHARGE
indicator flashes, and (2) Press and hold the handset's
extension number {1} to {8} that you do not want for 5
seconds. A long beep sounds, then the handset
number is erased.
Advertisement
Table of Contents
