Useful Features During A Call - Panasonic KX-TG5871AL Operating Instructions Manual

TG5871AL.book Page 21 Friday, June 17, 2005 7:01 PM
To make a call using the redial list
The last 5 phone numbers dialled are
stored in the redial list.
1
Press {REDIAL}.
L The last number dialled will be
displayed.
2
Push the joystick up or down repeatedly
to display the desired number.
L To delete the displayed number,
press {CLEAR}.
L To exit the list, press {OFF}.
3
Press {C}, {s}, or {CALL}.

Useful features during a call

HOLD button
This feature allows you to put an outside
call on hold.
1
Press {HOLD} during an outside call.
L To transfer the call to another
extension, see page 38.
2
Press {HOLD} again.
L "Hold" will be displayed.
L To return to the call, press {C} or
{s}.
L The base unit user can take the call
by pressing {SP-PHONE}.
L Another handset user can take the
call by pressing {C} or {s}.
Note:
L If another phone is connected on the
same line (page 11), you can also take
the call by lifting its handset.
L If a call is kept on hold for more than 6
minutes, an alarm tone will start to
sound and the ringer indicator will flash
rapidly. After 4 additional minutes on
hold, the call will be disconnected.
Making/Answering Calls
MUTE button
You can mute your voice during a
conversation. While mute is turned on you
will be able to hear the other party, but the
other party will not be able to hear you.
To mute your voice, press {MUTE}.
L "<Mute>" will flash on the display.
L To return to the conversation, press
{MUTE}, {C}, or {s}.
Voice enhancer
This feature can simulate a band signal
above the normal bandwidth limitations,
achieving a sound which is close to the
actual voice. You can turn this feature on
or off, depending on the circumstance.
1
Press {MENU} (centre of joystick)
during an outside call.
2
To turn this feature on or off, press {3}.
L You can also turn this feature on or off
by pushing the joystick up or down,
then pressing {SELECT}.
L When turned on, W will be
displayed.
Note:
L Once you turn voice enhancer on, it will
be activated for all outside calls until
turned off.
L You can also turn this feature on or off by
programming (page 52).
L Depending on the condition and quality
of your telephone line, this feature may
emphasise existing line noise. If it
becomes difficult to hear, turn this
feature off.
21