User Parameters; General Description; Setting The Date And Time - Panasonic Panafax UF-6000 Operating Instructions Manual

User Parameters

General Description

Your facsimile machine has several basic settings (User Parameters) to help you keep records of the
documents you send or receive. For example, the built-in clock keeps the current date and time, and your
LOGO and ID Number help to identify you when you send or receive documents.

Setting the Date and Time

At standby the display will show the date and time. Once the standby display is set, it will automatically be
updated.
1
2
3
4
5
NOTE
26
7
1
Enter the new date and time.
Ex:
0 3
1 2
2 0 0 5
1 5 0 0
If you make a mistake, use
over the incorrect number, then overwrite it with a correct
one.
1. The clock of your machine is equipped with D.S.T.(Daylight Saving Time) system. So, your
clock will automatically set the time forward from 2:00 AM to 3:00 AM on the first Sunday of
April and set the time back from 2:00 AM to 1:00 AM on the last Sunday of October.
If your state does not use the D.S.T. system, change the Fax Parameter No. 35 (DAYLIGHT
TIME) to "Invalid" . (See page 38)
2. The current Date & Time must be set because it is required by the Telephone Consumer Act of
1991. (For details, see FCC NOTICE at the end of this Operating Instructions)
Month: March
Date : 12th
Year : 2005
Time : 3:00 PM
or to move the cursor
SET MODE (1-8)
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
DATE & TIME
❚1-01-2001 00:00
DATE & TIME
03-12-2005 15:00