Panasonic Panafax UF-6000 Operating Instructions Manual page 57

Voice Mode Transmission
On-Hook Dialing
For On-Hook Dialing, follow the steps below.
1
2
You will hear dial tone through the monitor speaker.
3
Dial the telephone number from the keypad.
Ex:
5 5 5 1 2 3 4
4
When you hear a beep,
NOTE
1. If you need a special access number to get an outside line, dial it first then press
enter a pause (represented by a "-") before dialing the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialing and you wish to change to Tone dialing in the middle of dialing,
press
The dialing mode will be changed from Pulse to Tone after dialing the digit "/".
Ex: 9 PAUSE TONE 5551234
Set document(s) face down.
TONE (represented by a "/").
Sending Documents
ENTER STATION(S)
THEN PRESS START 00%
* MONITOR *
❚
* DIALING *
5551234❚
ON LINE * XMT *
PAUSE to
57