Media Problems - Panasonic KX-PS8000 Operating Instructions Manual

Media problems

Trouble
Frequent paper-
picking errors.
Frequent media jams.
Problems with image size and position
Trouble
Off-set images.
Cut-off images.
Care and Maintenance
Corrective Action
Fan the paper or transparencies before installing them in
their respective trays; this is especially important for
transparencies because they tend to stick together.
Make sure that you have loaded paper in the paper tray
and transparencies in the transparency tray.
Make sure that the media is installed under the hooks at
the front of the media tray.
If printing on transparencies and your printer has a 2nd
Cassette Feeder, make sure that the transparency tray is
installed in the upper or middle tray slot.
Clean the paper-pick rollers
Make sure that you use a high-quality laser paper:
60-105 g/m 2 (16-28 lbs.) paper in the media trays and
75-165 g/m 2 (20-44 lbs.) paper in the multi-purpose tray.
If you are using media that is 105 g/m
the Face Down media output setting is selected in the
driver. If it is, change the setting to Face Up.
Use only recommended transparencies
We cannot guarantee the results of other transparencies
in KX-PS8000 printers.
Make sure that the media is installed under the hooks at
the front of the media tray.
Do not overfill the media tray, as indicated by the red line
on the right side of the tray.
Clean the paper-pick rollers
Make sure that the media thickness switch is set
correctly for the installed media
Corrective Action
Check your application for correct image sizing.
Check your application for image sizing.
Make sure that the correct size media is in the media
tray.
( P. 94 for instructions).
2 (28 lbs.), check if
( P. 152).
( P. 94 for instructions).
( P. 38).
123