Panasonic KX-PS8000 Operating Instructions Manual page 74

Setup
74
4
If you wish to adjust the density for each color independently,
B
perform the following, then go to step 5.
# Repeat instructions # through % of step 1 on
$ Press the F button.
Color Calibration
CYAN
% Press the ENTER button.
CYAN
0* (-10 to 10)
& Press the F/I button to darken/lighten the cyan color.
Pressing the F/I button twice selects the next/previous level setting.
(For example:)
BIf you wish to make the density setting darker by 4 levels:
Press the F button 8 times.
BIf you wish to make the density setting lighter by 2 levels:
Press the I button 4 times.
' Press the ENTER button.
Color Calibration
MAGENTA
( Repeat instructions % through ' for each color
(MAGENTA, YELLOW, BLACK).
BTo skip a color, press the F button.
BTo return to a previous color, press the I button.
BBefore going to step 5, make sure the following is displayed.
Color Calibration
Calibration Test Print
Press the ENTER button to reprint the Color Calibration Page.
5
BThe line enclosure reflects the changes made to the settings.
BIf you are not satisfied with the current color density settings, repeat steps 4
and 5 above.
Notes:
B The color density setting affects the average life of toner.
B Save the Color Calibration Card for future calibrations.
page 70.