Scanner Panel Overview - Panasonic KX-PS8000 Operating Instructions Manual

Before You Start

Scanner Panel Overview

22
#
LCD (Liquid Crystal Display) panel
The scanner LCD has two 20-character lines to display the scanner's or
duplicator's status/error messages or the duplicator's menu settings. When
the duplicator is ready, "Ready" with duplicate settings such as number of
copy, density setting is displayed.
$
INCREASE/NEXT button
BWhen the scanner is ready, pressing this button increases the number of
duplicates by 1. You can set the number of duplicates from 1 to 99.
Pressing this button for more than 2 seconds automatically increases the
number of duplicates by 1.
Pressing this button for more than 8 seconds increases the number of
duplicates by 10.
BIn the Menu mode, pressing this button displays the next selection.
%
MODE button
BWhen the scanner is ready, pressing this button enters the Menu mode.
BIn the Menu mode, pressing this button displays the next menu.
BPressing MODE + START COLOR, or MODE + START B/W allows you to
select an image type
#
INCREASE/NEXT
READY/ERROR
&
( P. 79).
$ %
RESET
START
STOP
B/W
MODE
' (
ENTER
START
COLOR
)