Panasonic KX-PS8000 Operating Instructions Manual page 58

Setup
58
Using Plug and Play
1
Turn on the scanner, then the printer.
2
Turn on the computer and start Windows 95.
The New Hardware Found window is displayed for a few seconds, then the
Update Device Driver Wizard window is displayed.
3
Insert the KX-PS8000 CD-ROM into CD-ROM drive.
4 Click Next> .
5
Click Finish .
The Insert Disk window is displayed.
6
Click OK .
The Copying Files window is displayed.
7
Type in your CD-ROM drive name followed by :\ (example; D:\) in
the Copy file from field and click OK .
Wait until the Panasonic KX-PS8000 Utilities Welcome window is displayed.
8 Follow the instructions on the screen to complete the installation.
After installation, restart your system.
Note:
BThe Plug and Play installation procedure varies depending on the version of
Windows 95. Refer to Help in Windows 95.