Establishing The Connection From The Mobile Phone - Mercedes-Benz COMAND Operating Instructions Manual

Connecting/disconnecting a mobile phone
94
To ensure an optimum language quality, you can
set the mobile phone's transmission and recep-
tion volume ( page 95).
Y
If the Authorization Failed
appears, you may have entered a different pass-
key or exceeded the prescribed time limit.
Repeat the procedure.
i
Some mobile phones require a passkey with
four or more digits.
i
If you wish to re-authorize the mobile phone
after de-authorizing it, you can choose
another passkey for it.
Establishing the connection from the
mobile phone
®
The Bluetooth device name of the multimedia
system is MB Bluetooth.
Multimedia system: call up the telephone
X
menu.
To switch to the menu bar: slide 6 the con-
X
troller.
To select Connect
X
the controller.
The device list is displayed.
To select Connect via
X
press the controller.
A message is displayed, stating that you can
start the search on your mobile phone.
Mobile phone: start the search for a Blue-
X
®
tooth device (see manufacturer's operating
instructions).
The multimedia system is displayed with the
name MB Bluetooth
device list.
Select MB Bluetooth.
X
A prompt appears in the multimedia system's
display asking if the mobile phone should be
authorized.
Multimedia system:select Yes.
X
If No is selected, the procedure is canceled.
If your mobile phone supports Secure Simple
Pairing, a code is now displayed on both devi-
ces.
The code is the same
Multimedia system:select Yes.
X
Mobile phone: confirm the code. Depending
X
on the mobile phone used, you may have to
confirm the connection to the multimedia sys-
message
Device: turn and press
Phone: turn and
in the mobile phone's
tem and for the PBAP and MAP Bluetooth
profiles. The prompt to confirm may take up
to two minutes to be displayed. You may also
save the confirmation on the mobile phone
(see the manufacturer's operating instruc-
tions).
The mobile phone is now authorized and con-
nected to the multimedia system. You can
now speak using the hands-free system.
To ensure an optimum language quality, you can
set the mobile phone's transmission and recep-
tion volume ( page 95).
Y
The code is different
Multimedia system:select No.
X
The process is canceled. Repeat the proce-
dure.
If your mobile phone does not support Secure
Simple Pairing, an input menu is displayed for
the passkey. The passkey is a one- to sixteen-
digit number combination which you can choose
yourself. Enter the same passkey in both the
multimedia system and on the mobile phone and
confirm. Depending on the mobile phone used,
you may have to confirm the connection to the
multimedia system and for the PBAP and MAP
®
Bluetooth profiles.
Reconnecting automatically
The multimedia system always searches for the
last connected mobile phone.
If no connection can be made to the most
recently connected mobile phone, the system
searches for the mobile phone that was con-
nected before that one.
Switching between mobile phones
If you have authorized more than one mobile
phone, you can switch between the individual
phones.
To call up the telephone menu: press the
X
% button.
To show the menu bar: slide 6 the control-
X
ler.
®