Mercedes-Benz COMAND Operating Instructions Manual page 90

Problems with the navigation system
88
You will then see maps with the current vehi-
cle position and the vicinity of the destination
in different scales, these are automatically
displayed one after another.
If mbrace is activated for Internet access
( page 119), additional information can be
Y
displayed, e.g. weather at the destination.
i
Alternatively you can call up this function
using the touchpad (
To exit Drive Information: press the controller.
X
Press the % button.
X
Route flight
Call up the navigation menu (
X
Turn the controller until
X
brought to the front.
Press the controller.
X
i
Alternatively you can call up this function
using the touchpad (
Problems with the navigation system
Problem
The multimedia system
does not resume route
guidance after the jour-
ney has been interrup-
ted.
Problem
The multimedia system
is unable to determine
the vehicle's position.
page 23).
Y
page 87).
Y
Route Flight is
page 23).
Y
Possible causes/consequences and M Solutions
Route guidance is canceled if you interrupt the journey for more than
two hours.
"Interrupting the journey" refers to stopping the vehicle.
"Continuing route guidance" refers to switching the multimedia sys-
tem back on and driving on.
Continue route guidance manually (
X
Possible causes/consequences and M Solutions
The multimedia system must identify the vehicle's position again after
it has been transported.
Example:
After transporting the vehicle by ferry
R
After transporting the vehicle by motorail
R
Start the vehicle and pull away.
X
The multimedia system calculates the vehicle's position. Depending
on the driving situation, this may take some time.
Route guidance may be restricted during the determination of the
vehicle's position.
When positioning is complete, route guidance is resumed with nav-
igation announcements and route guidance displays.
Select Ì.
X
The route will be flown along from a helicopter
perspective.
To stop route flight: select Ë.
X
To exit the route flight: press the controller.
X
Press the % button.
X
Info on navigation
Call up the navigation menu (
X
Turn the controller until
X
tion is brought to the front.
Press the controller.
X
The Digital Operator's Manual is opened at
the section on navigation.
i
Alternatively you can call up this function
using the touchpad (
page 74).
Y
page 87).
Y
Info on Naviga‐
page 23).
Y