Category - Mercedes-Benz COMAND Operating Instructions Manual

To switch to navigation mode: press the
X
Ø button.
If no route guidance is active, select
X
nation.
i
If route guidance is active, first slide 6 the
controller and show the menu.
Select Contacts.
X
Select the destination.
X
The address entry menu appears, showing the
contact and associated destination address.
To start route calculation: select
X
Selecting a POI category
Select a category or one of the searches listed in the table.
X
The G symbol after an entry shows that further categories are available.
Select a sub-category.
X
The search for POIs starts.
If route guidance is active, first define the position for the POI search (
If no route guidance is active, the POI search covers a 240 mile (400 km) radius around the current
vehicle position.
Once the search is completed, the POI list is displayed.
The search results display the following information:
an arrow that shows the linear direction to the POI (search around vehicle position)
R
the linear distance to the POI
R
the name of the POI
R
Select a point of interest (
X
The complete address of the POI is shown.
Calling up the POI menu
Desti‐
X
X
i
X
Start .
page 62).
Y
Destination entry
Selecting a destination from POIs
To switch to navigation mode: press the
Ø button.
If no route guidance is active, select
nation.
If route guidance is active, first slide 6 the
controller and show the menu.
Select POIs.
Y
Desti‐
page 62).
Z
61