Avoiding An Area - Mercedes-Benz COMAND Operating Instructions Manual

Map functions
84
Select 3D Map
X
Turn the controller to change to the 3D map
X
perspective.
Additional functions:
Moving the map (
R
Map display
Displaying the navigation map
The multimedia system displays the navigation
map and globe satellite images. This allows for a
realistic map display free from distortion in all
map scales.
Other functions:
Moving the map (
R
Changing the map scale (
R
Building images
In small map scales 1/32 mi (20 m) and 1/16 mi
(50 m) important buildings are depicted realis-
tically on the map. Other buildings are shown as
models.
Rotation.
page 53)
Y
page 53)
Y
page 81)
Y
Elevation model
The map uses elevation modeling to show a
realistic illustration.

Avoiding an area

General notes
The multimedia system enables you to avoid
areas you do not wish to drive through.
If you activate or deactivate a route block while
route guidance is active, the multimedia system
will calculate a new route. If you activate or
deactivate a route block while route guidance is
inactive, the multimedia system will use the new
setting for the next route guidance.
The calculated route may include an area to be
avoided if:
your destination is located in such an area
R
there is no alternative route of comparable
R
length available
Highways within blocked areas are always taken
into consideration in the route calculation.
i
Alternatively, you can carry out this opera-
tion using the touchpad (
Avoiding a new area
To switch to navigation mode: press the
X
Ø button.
To show the menu: slide 6 the controller.
X
X
To select : turn and press the control-
ler.
Select Route Settings.
X
Select Avoid Options.
X
Select Avoid Area.
X
page 23).
Y