Telephone Menu; Connecting/Disconnecting A Mobile Phone - Mercedes-Benz COMAND Operating Instructions Manual

using the 6 or ~ button on the multi-
R
function steering wheel
using the Voice Control System (see the sep-
R
arate operating instructions)
Function restrictions
You may have to wait to use telephony via the
multimedia system in the following situations:
if the mobile phone is switched off
R
®
if Bluetooth is switched off on the mobile
R
phone
if the mobile phone is not (or not yet) logged
R
into a mobile phone network
®
if the Bluetooth function is switched off in
R
the multimedia system
The telephone automatically tries to log on to a
network. If no network is available, you may not
be able to make a "911" emergency call. If you
attempt to make an outgoing call, the
vice message will appear for a short while.

Telephone menu

Mobile phone network provider
:
Signal strength of the mobile phone network
;
= Receiver icon ¢ or ¡
? Telephone menu character bar
A ®
Bluetooth device name of the currently
connected mobile phone
B Enters characters using the touchpad
Displays the phone book
C
Symbols : to = and A are not shown until
after a mobile phone has been connected to the
multimedia system. The symbols depend on
your mobile phone and your mobile phone net-
work provider. Further information on connect-
ing a mobile phone (
Y

Connecting/disconnecting a mobile phone

No Ser‐
page 91).
Symbol ; shows the current signal strength of
the mobile phone network. If all bars are filled,
you have optimum reception.
If the bars are not filled, you have very poor
reception or no reception at all.
i
Receiver icon shows whether a call is
active/being connected ¡ or not ¢.
Calls up the telephone menu
Press %.
X
Showing the menu bar
Slide 6 the controller.
X
If the mobile phone connected supports the
®
MAP Bluetooth profile (Message Access
Profile), the 1 menu item is available. Further
information on text messages and e-mail
( page 112).
Y
If you have an unread text message or e-mail,
the 0 mail symbol is displayed at the top in
the status bar. The symbol disappears once you
have read the text message or e-mail. The ú
symbol is displayed as soon as the message
memory on the mobile phone or SIM card is full.
The symbol disappears once you delete at least
one message.
Connecting/disconnecting a mobile
phone
Prerequisites
For telephony via the Bluetooth
®
require a Bluetooth -capable mobile phone. The
mobile phone must support Hands-Free Profile
1.0 or above.
On the multimedia system
®
Activate Bluetooth
X
On the mobile phone
Switch on the mobile phone and enter the PIN
X
when prompted to do so (see the manufac-
turer's operating instructions).
®
Activate Bluetooth
X
®
tooth visibility for other devices (see the
manufacturer's operating instructions).
This visibility is for restricted periods of time
on some mobile phones (see the manufactur-
er's operating instructions).
®
Set the Bluetooth device name for the
X
mobile phone if necessary.
®
interface, you
( page 39).
Y
and, if necessary, Blue-
Z
91