Basic Settings - Mercedes-Benz COMAND Operating Instructions Manual

entering POIs in the vicinity of a city or via a
R
name search
editing entries
R
Other entries are possible, such as entering
points of interest in the vicinity of the destina-
tion or current position.
Switching to navigation mode
Traffic reports can be received or traffic
:
reports are available
Press the ß button.
X
If route guidance is active, the map is shown
in full-screen mode. The map shows the vehi-
cle's current position.
If no route guidance is active, the menu is also
displayed. Destination
Access from one of the other main functions:
To activate the menu: slide 5 the con-
X
troller (e.g. in radio mode).
To selectNavi: turn and press the controller.
X
The navigation menu appears.
Press the controller.
X
The map shows the vehicle's current position.
Access within navigation:
From any menu, press the ß button.
X
The navigation menu appears.
Press the controller.
X
Showing/hiding the menu
Using the menu, you can make a destination
entry or select the navigation settings, for exam-
ple.
If no route guidance is active, the menu appears
automatically after the navigation system is
switched on. Destination
is highlighted.
is highlighted.
To show (route guidance active): when the
X
map is shown, slide 6 the controller.
or
Swipe down the touchpad with one finger.
X
is highlighted.
To hide: press the % button.
X
or
Select Map.
X
Moving the map
Requirement: the map is in full screen mode, the
menu is faded out ( page 53).
Y
Press the controller.
X
The crosshair is shown.
Slide 1, 4 or 2 the controller.
X
The map moves in the corresponding direc-
tion under the crosshair.
i
Enter a destination using the map
( page 63).
Y

Basic settings

Selecting the route type
Basic settings
Z
53