Coordinates - Mercedes-Benz COMAND Operating Instructions Manual

Hide thumbs Also See for COMAND:
Table of Contents

Advertisement

Destination entry
66
Saving as a personal route
You can save a route including intermediate
destinations on the SD card.
Requirements: the SD card has the FAT data
system format (e.g. FAT32).
Insert the SD memory card (
X
To select
Save As Personal Route
X
intermediate destinations menu: press the
controller.
An input field appears.
Enter a file name in the input field. Press
X
confirm.
The route is saved to the SD memory card.
Searching for a gas station when the
fuel level is low
Requirement: the setting
be enabled (
page 55).
Y
If the fuel tank reserve level is displayed, you will
see the
Reserve Fuel Would you like to
start a search for surrounding gas
stations?
message.
To select
Yes
or No: turn and press the con-
X
troller.
If you select Yes: the gas station search
starts. When the search is complete, a list of
the gas stations available along the route or in
the vicinity is displayed.
If you select No: the search is canceled.
Select the gas station.
X
The address of the gas station is displayed.
To select Start: press the controller.
X
The selected gas station is entered into posi-
tion 1 of the intermediate destinations menu.
Route guidance begins.
If the intermediate destinations menu already
contains four intermediate destinations, a
prompt will be displayed, asking you whether
you wish to enter the gas station into position
1. If you select Yes, the gas station is trans-
ferred into the list and intermediate destina-
tion 4 is deleted.
Entering a destination from
Mercedes-Benz Apps
Requirement (USA): mbrace is activated for the
Mercedes-Benz Apps (
page 141).
Y
in the
OK
Gas on Reserve
must
page 119).
Y
Requirement (Canada): a mobile phone is con-
nected to the multimedia system via Bluetooth
(
page 91) or USB (
Y
To switch to navigation mode: press the
X
Ø button.
If no route guidance is active, select
X
nation.
i
If route guidance is active, first slide 6 the
controller and show the menu.
Select
Mercedes-Benz
X
The list of Mercedes-Benz Apps appears.
to
Using geo-coordinates
To switch to navigation mode: press the
X
Ø button.
If no route guidance is active, select
X
nation.
i
If route guidance is active, first slide 6 the
controller and show the menu.
Select Geo-coordinates.
X
Geo-coordinates (longitude and latitude) are
entered in degrees, minutes and seconds.
To enter geo-coordinates: turn the control-
X
ler.
The value for degree, minute or second
changes.
To move the selection within the line: slide
X
1 the controller.
To move the selection between lines: slide
X
4 the controller.
To confirm the value: press the controller.
X
To store geo-coordinates: select
X
turning and pressing the controller.
The destination with the geo-coordinates can
be saved as:
a home address in the address book
R
a navigable address book contact
R
For further information on the address
book, see (
Y
a personal destination on the SD card
R
(
page 80).
Y
To start route calculation: select
X
Route Guidance
controller.
page 155).
Y
Desti‐
Apps.
Desti‐
Save
page 103)
Start
by turning and pressing the
®
by

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents