Entering A Destination Via Geo Coordinates - Mercedes-Benz COMAND MY07 Operator's Manual

Entering a destination via geo coor-
dinates
Destination input via coordinates (longi-
tude and latitude) will only be possible if
the map display is visible and if the
soft key is displayed.
Press 6.
Press any soft key if the soft key dis-
plays are hidden.
The soft key displays appear.
Coord.
Press the
The menu for entering coordinates ap-
pears. You can set the individual values
for the longitude and latitude in this
Coord. menu.
1 "Hours" longitude value
2 "Minutes" longitude value
3 "Seconds" longitude value
4 "Seconds" latitude value
5 "Minutes" latitude value
6 "Hours" latitude value
soft key.
Navigation*
Destination entry
Press # or $ to select the value you
wish to set.
Select the desired value using % or
&.
Keep repeating the last two steps until
you have set the required longitude and
latitude.
Press '.
If the coordinates entered are located
in the digital map range, the display will
switch to map display with cursor. The
center point of the cursor indicates the
position of the coordinates entered on
the map.
125