Displaying Configuration Details With Show Commands - Cisco XR 12000 Series Getting Started Manual

Managing Configuration Sessions

Displaying Configuration Details with show Commands

The following sections describe the following tasks:
•
•
•
•
•
•
•
Displaying the Running Configuration
The running configuration is the committed configuration that defines the router operations, and it is
divided into the administration configuration and an SDR configuration for each SDR. The portion of
the running configuration that you can view depends on the current CLI mode and SDR connection.
In EXEC mode and global configuration mode, you can view the SDR configuration for the SDR to
which you are connected. When you are connected to the DSC and operating in administration EXEC
and administration configuration mode, you can view the administration configuration, which includes
hardware assignments for SDRs and multishelf systems.
To display the SDR portion of the running configuration, connect to the appropriate SDR and enter the
show running-config command in EXEC or global configuration mode, as shown in the following
example:
RP/0/0/CPU0:router(config)# show running-config
Building configuration...
!! Last configuration change at 11:05:38 UTC Mon May 02 2005 by cisco
!
hostname router
logging console debugging
telnet ipv4 server max-servers 5
username iosxr
password 7 011F0706
group root-system
group cisco-support
!
ntp
interface Loopback99
broadcast
!
interface Loopback999
broadcast
!
interface Loopback9999
broadcast
!
authenticate
max-associations 2000
!
interface Loopback0
ipv4 address 10.1.2.3 255.255.0.0
load-interval 0
!
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
3-54
Displaying the Running Configuration, page 3-54
Displaying a Sanitized Version of the Running Configuration, page 3-56
Displaying the Target Configuration, page 3-58
Displaying a Combined Target and Running Configuration, page 3-58
Displaying Configuration Error Messages and Descriptions, page 3-59
Displaying Configuration Error Messages Without Descriptions, page 3-60
Displaying Configuration Error Messages Produced While Loading a Configuration, page 3-60
Chapter 3 Configuring General Router Features
OL-24755-01