Where To Go Next - Cisco XR 12000 Series Getting Started Manual

Chapter 2 Bringing Up the Cisco IOS XR Software on a Standalone Router
show environment Command: Example
To display environmental monitor parameters for the system, use the show environment command in
EXEC or administration EXEC mode. The show environment [options] command syntax is used.
Enter the show environment ? command to display the command options:
RP/0/0/CPU0:router# show environment temperatures
The following example shows temperature information for a Cisco XR 12000 Series Router:
Mon May 31 02:27:06.397 DST
R/S/I
0/0/*
0/2/*
0/3/*
0/4/*
For more information, see Cisco IOS XR Interface and Hardware Component Command Reference for
the Cisco XR 12000 Series Router.

Where to Go Next

For information on configuring basic router features, see
OL-24755-01
Modules Sensor
host Inlet
host Hot
host Inlet
host Hot
host Inlet
host Hot
spa2 Chan4
spa2 Chan3
spa2 Chan2
spa2 Chan1
spa2 Local
spa1 Chan4
spa1 Chan3
spa1 Chan2
spa1 Chan1
spa1 Local
host Hot
host Inlet
spa0 DownStream_
spa0 UpStream_
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
Temp. (deg C)
32.5
34.0
31.0
39.0
32.0
42.0
50.0
43.0
48.0
39.0
48.0
37.0
33.0
39.0
33.0
35.0
38.5
36.5
35.0
31.5
Configuring General Router
Where to Go Next
Features.
2-25