Cisco XR 12000 Series Getting Started Manual page 69

Chapter 3 Configuring General Router Features
interface Loopback1
ipv4 address 10.0.0.0 255.0.0.0
!
interface Loopback7
load-interval 0
!
interface Loopback2000
load-interval 0
!
interface Loopback2001
load-interval 0
!
interface Loopback2003
load-interval 0
!
interface MgmtEth0/RP1/CPU0/0
ipv4 address 10.0.0.0 255.0.0.0
!
interface POS0/0/0/0
shutdown
!
interface POS0/0/0/1
shutdown
!
interface POS0/0/0/2
shutdown
!
interface POS0/0/0/3
shutdown
!
interface POS0/3/0/0
shutdown
!
interface POS0/3/0/1
shutdown
!
interface POS0/3/0/2
shutdown
!
interface POS0/3/0/3
shutdown
!
interface preconfigure MgmtEth0/RP0/CPU0/0
shutdown
!
router static
address-family ipv4 unicast
0.0.0.0/0 MgmtEth0/RP1/CPU0/0
!
!
end
To display the sanitized administration portion of the running configuration, connect to the DSC and
enter the show running-config sanitized command in administration EXEC or administration
configuration mode, as shown in the following example:
RP/0/0/CPU0:router(admin)# show running-config sanitized
Mon May 31 21:35:14.902 DST
Building configuration...
!! IOS XR Admin Configuration 4.1.0
sdr <removed>
location 0/1/*
location 0/4/* primary
!
OL-24755-01
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
Managing Configuration Sessions
3-57