Installation Installing The Handset Cradle - Panasonic KX-F880 Operating Instructions Manual

Installation
Installing the handset cradle
If you want to use this unit with a handset, install the handset and handset cradle.
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
Even if the handset and handset cradle are not installed, you can make or answer calls using the
DIGITAL SP-PHONE button. When you do not use the handset and handset cradle, see pages 65 and 75.
1
Connect the handset cord.
2
A
Open the front cover by pressing the front cover
open button.
B Open the back cover by lifting up the tabs located
on both sides.
3 Insert the handset cradle by matching the triangles
on the cradle and base unit.
4
Press down on the
cradle until it clicks into place.
Make sure the two hooks lock the handset
cradle into place.
5 Place the handset on the handset cradle.
Close both covers securely.
8
marked on the handset
For Assistance, Call 1-800-435-7329
Handset cord
Handset
Front cover
A
open button
Triangles
Hooks
Tab
B
Triangles