Clearing a document jam
If the unit does not release the original document during feeding, remove it as shown below.
Open the front cover by pressing the front cover
1
open button.
2
Remove the jammed document carefully.
Close the front cover by gently pressing down on
3
both corners of the cover.
Adjusting the feeder pressure
When no feeding or multiple feeding occurs frequently, adjust the feeder pressure.
1
Open the front cover by pressing the front cover
open button.
2
Shift the position of the lever by using an instrument
with a pointed end, like a clip or ball-point pen.
Position A: When documents do not feed
Position B: Standard position (pre-selected)
Position C: When documents multiple feed
3
Close the front cover by gently pressing down on
both corners.
74
A
B
Front cover
open button
Front cover
open button
Lever
C