Panasonic Workio DP-C305 Operating Instructions Manual page 81

ATTENTION
Do not remove the Drum Protective
Cover until step 8.
Drum Protective Cover
Do not touch or turn around the Gear
of OPC Drum Unit.
7
Align the Green Arrows of the new OPC
Drum Unit with the ones on the machine,
and then insert the OPC Drum Unit into
the machine up to the Black Arrow on
the Drum Protective Cover.
8
Peel off the Orange Tape.
Remove the Drum Protective Cover.
Drum Protective Cover
Gear
Green Arrows
Black Arrows
9
Carefully insert the new OPC Drum Unit
all the way in until it stops.
OPC Drum Unit
10
Lock the new OPC Drum Unit by turning the
Drum Release Knob clockwise.
Paste one of the enclosed color labels matching
in color with the one on the replaced drum and
attach it to the same position on the new drum.
11
Insert the Toner Waste Container all
the way in until it stops.
Toner Waste Container
●
Exercise care not to incline the container, or
toner may spill.
12
Gently close the Front Cover.
Place the old OPC Drum Unit inside the
plastic bag and dispose of it according
to your local regulations.
Drum Release Knob
Color Label
81