Placing Originals (Facsimile/Internet Fax); How To Place Originals - Panasonic Workio DP-C305 Operating Instructions Manual

Placing Originals (Facsimile/Internet Fax)

■ ■ ■ ■ ■ How to Place Originals
● ● ● ● ●
On the ADF
●
When scanning from the ADF, read the notice for ADF. (See pages 20, 56, and 57)
● ● ● ● ●
On the Platen Glass
●
When scanning from the Platen Glass, read the notice for Platen Glass. (See pages 20, 21, 56, and 57)
● ● ● ● ●
Sending Non-Standard Size Originals
When transmitting non-standard size original(s),
the machine may perform Rotate transmission
automatically and not transmit the portion of the
original that exceeds the standard size ("P" portion).
●
Rotation XMT is not carried out in
Monitor Dial transmission.
●
When an oversized original is sent
to another machine, it may be
reduced in accordance with the other
party's recording paper size.
● ● ● ● ●
Scanning Area
Ex:
Original Width:
216 mm (8.5")
56
Original Guides
Adjust the Original Guides to
the original's width.
8 mm (0.3")
with Header Area
5 mm
(0.2")
Scanning
Width:
206 mm
(8.1")
5 mm
(0.2")
Scanning Direction
Originals can be set up to the
Upper Limit Indicator.
Upper Limit Indicator
Upper Guide
Rotation XMT
A
P
The portion labeled "P"
that exceeds the
Scanning Direction
standard original size is
not sent.
Ex:
11" x 17" size
5 mm (0.2")
The original's border (gray area)
will be lost during scanning.
8.5" x 11" size