Panasonic DP-6010 Operating Instructions Manual page 58

Other Features
Skyshot Mode
I I I I I Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in advance.
C C C C C Set 07 Manual Skyshot Mode in Copier Settings first. (See page 53)
Platen
Upper-
Left
Corner
2
A
Changing the default M1/M2 size
NOTE
58
1
Place the
Original*
3
∗
If using i-ADF, place original on the centre position of ADF Tray. The i-ADF tray can be
fed only 50 -105 g/m
C When changing the M1 or M2 Size, consult with the key operator.
C When using the manual skyshot mode, the M1 and M2 are turned On and other job
memory cannot be used.
C To reset the manual skyshot mode, press the RESET key.
B4·FLS
2
Touch the JOB
MEMORY button
This setting should be carried out by a Key Operator.
# Select the COPIER SETTINGS in Function Setting
mode.
(See page 68)
$ Touch the FG buttons to advance to the 04/04
Display Screen of Copier Settings menu.
% Touch the 19 Set key operator code button.
& Enter the Key Operator's ID Code and then press
the OK button.
( Touch the FG buttons to advance to the 03/05
Display Screen.
) Select 12 M1, size and 13 M2, size and enter the
original's size.
* Touch the OK button.
2 plain paper.
3 4
Select Custom Number of
Size (M1 or M2) Copies
5
Press
START