Skyshot Mode - Panasonic DP-6010 Operating Instructions Manual

Skyshot Mode

I I I I I Skyshot allows copying a manuscript without generating dark borders
even if the platen cover or ADF is opened.
Skyshot mode eliminates dark borders around the originals, and is especially convenient for
copying small-sized originals like bank checks or documents with unusual shapes (round, oval,
etc.). These documents can be reproduced without generating any unnecessary black areas
simply by making a copy with the cover open.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode : The scanning area (size) is pre-registered into memory (M1 and M2) in
I I I I I Digital Skyshot Mode
B4·FLS
1
Place the Original on the platen
(Opening the Platen Cover/ADF)
The Digital Skyshot has been 2 modes (
The default setting of Digital Skyshot Mode is "None".
Before using this mode, select each setting by using the Function setting.
C An incorrect exposure may occur when there is a black line at the edge of
NOTE
the original or an image which the copier interprets as a black pattern in the
skyshot mode.
C An incorrect position detection of the original may occur when a strong light
shines onto the glass during skyshot mode.
advance. (See page 72)
(
Select the Digital Skyshot Mode
or
copy
# Press the FUNCTION Key.
$ Touch the COPIER SETTINGS button.
% Touch the [ button to advance to the 02/04 Display
Screen of Copier Settings menu.
& Touch the 06 Digital skyshot mode button.
( Select the desired function and touch the OK button.
06 Digital skyshot setting
No
Freeshp (Free shape) : Copy is made with slant.
Parallel
Other Features
3
2
)
Press START
).
: None
: Copy is made to parallel.
(within 5 degrees)
copy
57