Notice For I-Adf; Using The Sheet Bypass - Panasonic DP-6010 Operating Instructions Manual

I I I I I

Notice for i-ADF

Inappropriate Originals
C Paper with a smooth surface such as glossy
and coated papers
CTransparencies
C Originals with a Lead Edge that is "creased",
"folded", "punched" or "glued"
When copying the thick Booklet, open the ADF and check the ADF Hinge is returned to original
angle if ADF rear side is lifted up.
I I I I I

Using the Sheet Bypass

Copying on Special Paper, etc.
Sheet Bypass
Open the Sheet Bypass.
C Do not feed curled paper through the sheet bypass to avoid misfeed.
ATTENTION
C Certain types of transparency film may not be compatible and may damage
your machine. Consult with an authorised Panasonic dealer for advice
regarding non-standard paper types. (Panasonic has tested "3M PP2500"
transparency film and found it to be compatible.)
C Paste-ups
C Pressure sensitive or carbon backed papers
C Paper with excessive curl
C Stapled originals
C Freshly printed copies from a laser printer
1
Pull out the Sheet Bypass Tray
until it stops.
Basic Menu
2
# Place the sheets of paper into
the tray. (Approximately up to
50 A4 size sheets/80 g g g g g /m
2
Do not load paper above the upper
limit arrow indicated on Side Guides.
Insert the paper until it stops.
$ Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
)
17