Edge/Book/Margin - Panasonic DP-6010 Operating Instructions Manual

Edge/Book/Margin

I I I I I Procedure
B4·FLS
1 2
Place the Select ZOOM/
Original(s) EFFECT Mode
Edge
Book
Margin
∗
Initial setting (Factory setting) can be changed by the function mode.
NOTE
(See page 62)
∗∗
If a part of the copied image is missing when using the Margin mode,
change the Margin Reduction setting to Yes. (See page 62)
C To reset each menu mode, touch the CANCEL button on the touch panel.
3
Select Edge, Book or
Margin
# When the vertical and horizontal void areas are the
same, adjust the void width by using the F·G buttons,
then touch the OK button.
# When the vertical and horizontal void areas are
different, select vertical or horizontal edge.
$ Adjust each void width by using the F·G buttons.
% Touch the OK button.
∗
Initial setting (Factory setting): 5 mm
# Adjust void width by using the F·G buttons.
$ Touch the OK button.
∗
Initial setting (Factory setting): 20 mm
# Select the Margin area.
$ Adjust void width by using the F·G buttons.
The image is moved only by the void width which has
**
been set.
% Touch the OK button.
∗
Initial setting (Factory setting): 10 mm
Zoom/Effects
4 5
Number
Press
of Copies
START
41