Dial Plan - Planet Networking & Communication IP-1000PT User Manual

If set properly, press the corresponding key to turn up or turn down the value.

4.4.3 Dial Plan

1) Parameters and Settings
Field Name
Dial Plan
Line
Digit Map
Action
Move Up
Move Down
2) Add Dial Plan
Enable Dial Plan;
Click the Add button, and the configuration table will be like the above one;
Fill in the value of parameters;
Press the OK button to end configuration;
Press Save to submit the changes and press the Reboot button to make the changes effective.
The following window is an example of the use of dial plan. You can set your IP phone like this to
check if its dial plan functions well.
If set properly, take No.1 in the following window for example, you dial #56#, the IP phone's output will
be 23%5623%. Since VIP-1000 Series does not have LCD, you can use Hammer or Wireshark to
Enable dial plan or not.
Choose the call mode from line1. Fill in the sequence used to match input
number.
Please refer to the syntactic Dial Plan.
Choose the dial plan mode between Deny and Dial out. Deny means
VIP-1000 Series rejects the matched number, while dial out means VIP-1000
Series allows dialing out the matched number.
Press it to move up.
Press it to move down.
- 39 -
High Definition PoE/Non-PoE IP Phone
VIP-1000PT/VIP-1000T
Description