Procedure 2 Connector Check And Replacement Check - Toshiba Satellite M500 Maintenance Manual

2 Troubleshooting Procedures
Procedure 2 Connector Check and Replacement Check
The 3G is installed as an 3G card. If the 3G malfunctions, there may be a bad connection
between the 3G and the main board. Or the 3G or main board might be damaged.
Disassemble the computer following the steps described in Chapter 4, Replacement
Procedures and perform the following checks:
Check 1 Make sure the 3G is firmly connected to CON5601 on the main board and the
connector of the 3G.
If a connector is disconnected, connect it firmly and repeat Procedure 1. If the 3G
is still not functioning properly, perform Check 2.
Check 2 The 3G may be defective or damaged. Replace it with a new one following the
steps in Chapter 4, Replacement Procedures. If the 3G is still not functioning
properly, perform Check 3.
Check 3 The main board may be defective or damaged. Replace it with a new one
following the steps in Chapter 4, Replacement Procedures.
2-52
Downloaded from LpManual.com Manuals
2.16 SD Card Slot Troubleshooting
[CONFIDENTIAL] Satellite M500/M505/M507 Maintenance Manual