Toshiba Satellite M500 Maintenance Manual page 157

4. Pull the tab of the HDD assembly to remove it from the connector of the HDD
cable. Be careful not to damage the connector.
NOTE: The following steps describe how to disassemble the HDD assembly,
5. Place the HDD assembly on a flat surface, remove the HDD connector and then
remove the following screws.
4-18
Downloaded from LpManual.com Manuals
Figure 4-4 Removing 4 screws securing HDD assembly
however, do not disassemble if the HDD is working properly.
M34L FLAT HEAD screw
Figure 4-5 Removing the HDD connector
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
4