4 Replacement Procedures
4.4
HDD module
CAUTION: When handling the HDD, do not press the top surface as shown by the
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-4 to 4-10.
1. Turn the computer upside down.
2. Loosen the screw (with an e-ring) and remove the HDD cover, underneath which
there also installing the memory module.
3. Remove the following screws securing HDD module.
M23L
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL]
Downloaded from LpManual.com Manuals
arrow. Hold it by the sides.
Figure 4-3 Removing the HDD cover
FLAT HEAD screw
4
4-17