Vga Card - Toshiba Satellite M500 Maintenance Manual

4.19 VGA Card

Removing the VGA Card
To remove the VGA card, follow the steps below and refer to Figures 4-42.
1. Remove the following screws securing the VGA.
M23L
2. Remove the VGA Card from the slot at the pop-up angle
Install the VGA Card.
To install the VGA Card, follow the steps below and refer to Figures 4-42.
1. Insert the VGA Card into connector at an angle about 45
2. Secure the VGA Card with the following screws.
4-56
Downloaded from LpManual.com Manuals
FLAT HEAD screw
Figure 4-42 Removing screws securing VGA Card
M23L FLAT HEAD screw
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
2
2