Toshiba Satellite M500 Maintenance Manual page 164

4 Replacement Procedures
Installing the Wireless LAN card
To install the wireless LAN card, make sure that the computer is in boot mode and
powered off, follow the steps below and refer to Figures 4-9 to 4-10.
CAUTION: Be sure to switch the computer off before installing the wireless LAN
1. Insert the wireless LAN card into connector at an angle on the main board.
2. Gently push the wireless LAN card down and secure the wireless LAN card with the
following screw.
3. Connect the wireless LAN antenna cables (white antenna cable should be
connected with the main connector; black antenna cable should be connected with
the Aux. connector) to the connectors on the wireless LAN card.
4. Paste the piece of tape.
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL]
Downloaded from LpManual.com Manuals
card. Otherwise, the computer or the wireless LAN card may be
damaged.
M23L FLAT HEAD screw
2
4-25