Installing the HDD
To install the HDD, follow the steps below and refer to Figure 4-3 to 4-6.
CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may
1. Seat the HDD in the HDD Holder and secure the following screws.
2. Install the HDD connector.
3. Put the HDD into its slot and connect the HDD to the connector.
4. Secure them with the following screws.
CAUTION: Do not apply pressure to the center of the HDD pack. It may damage
5. Set the HDD cover and secure it with the screw (with an e-ring).
4-20
Downloaded from LpManual.com Manuals
damage the HDD.
M23L
FLAT HEAD screw
M34L
FLAT HEAD screw
the HDD pack. Hold the HDD pack by its corners.
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
4
4