Toshiba Satellite M500 Maintenance Manual page 177

Installing the LED board
To install the LED board, follow the steps below and refer to Figures 4-21 to 4-23.
1. Securing the board.
2. Install the LED board and the Fingerprint Board on the top cover.
3. Secure the following screws on the Top cover.
4. Install the bracket then securing the following screws.
5. Connect the cable to the board.
4-38
Downloaded from LpManual.com Manuals
M23.5L FLAT HEAD screw
M23.5L FLAT HEAD screw
M23L FLAT HEAD screw
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
4
4
2