Hsv300-S Rear View; Switch Management Gui - HP StorageWorks 4400 Installation Manual

Figure 16 HSV300-S rear view
1. Console port
2. Ethernet port
3. Browse to http://10.77.77.77 for the Controller 1 switch.
NOTE:
Fibre Channel switches are referred to as left slot switch and right slot switch in Brocade Web
Tools.
The switch management GUI (Brocade Web Tools) appears
Figure 17 Switch Management GUI
4. Change the IP address and other settings of the switch as appropriate for your network. You may
also rename the switch or perform other configuration activities at this time.
5. Remove the Ethernet cable from the first switch and connect the cable to the Ethernet port (2,
Figure 16) of the other embedded switch. Browse to http://10.77.77.78 for the Controller 2
switch and repeat step 4.
HP StorageWorks 4400 Enterprise Virtual Array installation guide
(Figure 17).
41