Maintenance; Cleaning The Terminal; Cleaning The Display Screen; Magnetic Stripe Reader - VeriFone MX 880 Installation Manual

Maintenance

Cleaning the
Terminal
CAUTION
Cleaning the
Display Screen
Magnetic Stripe
Reader

Smart Card Reader

The MX 800 Series terminal has no user-maintainable parts.
The smart card implementation is a proprietary hardware solution that has no
serviceable parts.
To clean the terminal, use a clean cloth slightly dampened with water and a drop
or two of mild soap. For stubborn stains, use alcohol or an alcohol-based cleaner.
For best results, use the VeriFone Cleaning Kit (P/N 02746-01).
Never use thinner, trichloroethylene, or ketone-based solvents as they may
deteriorate plastic or rubber parts. Do not spray cleaners or other solutions
directly onto the display. Spray a non-scrubbing cleaner onto a cloth or paper
towel and then clean the screen with it.
Spray a non-scrubbing cleaner onto a cloth or paper towel and then clean the
screen with it. Do not spray cleaners or other solutions directly onto the display.
Dirt can lead to magnetic stripe card reading problems. The magnetic stripe
reader (MSR) should be cleaned on a regular basis using commercially available
card reader cleaning cards.
Do not attempt to clean the smart card reader. Doing so may void the warranty.
For smart card reader service, contact your VeriFone distributor or service
provider.
C
HAPTER
MX 800 S I
ERIES NSTALLATION
3
23
G
UIDE