Maintenance And Cleaning; General Care - VeriFone P630 Installation Manual

4. Maintenance and Cleaning

General Care

Installation Guide
The P630 device has no user-maintainable parts. It can, however, be
cleaned.
Your device is a product of superior design and craftsmanship and
should be treated with care. The following suggestions will help you
protect your warranty coverage.
• Keep the device dry. Precipitation, humidity and all types of liquids
or moisture can contain minerals that will corrode electronic
circuits. If your device gets wet, switch off the power and allow the
device to dry completely before replacing it.
• Do not use or store the device in dusty and dirty areas. Its moving
parts and electronic components can be damaged.
• Do not store the device in hot areas. High temperatures can shorten
the life of electronic devices, damage batteries and warp or melt
certain plastics.
• Do not store the device in cold areas. It can form moisture inside
the device and damage electronic circuit boards when the device
returns to its normal temperature.
• Do not drop, knock, or shake the device. Rough handling can break
internal circuit boards and fine mechanics.
• Do not paint the device. Paint can clog the moving parts and
prevent proper operation.
• Keep the device free from any small and loose items (such as paper
clips, staples, or coins) that could accidentally get inside it through
an opening, such as the SAM slots or the primary smart card reader
slot.
• Do not attempt to open the device other than as instructed in this
guide. This device has security features that protect it from
tampering. For example, the file content will be deleted if the
device's outer casing is opened.
P630
40
© Verifone Inc. All rights reserved.