Installing Optional Components; Installing Countertop Wedge - VeriFone MX 880 Installation Manual

NOTE
Installing
Optional
Components
Installing
Countertop Wedge
To install the
countertop wedge
Table 4 Mounting Methods and Protection Measures
Method Cashier
Countertop Use signage
without stand behind the
PED
Countertop No action
with stand needed
VeriFone also recommends instruction of the cardholder regarding safe PIN-entry.
This can be done with a combination of:
•
Signage on the PED
•
Prompts on the display, possibly with a "click-through" screen
•
Literature at the point of sale
•
A logo for safe PIN-entry process
For a detailed discussion of PINpad Security Best Practices, see Appendix A.
This section discusses the installation procedures for the optional components
available for the MX 800 Series terminal. Your terminal may already have some of
these options, as modules can be installed at the factory or in the field.
The countertop wedge raises the rear section of the MX 800 Series terminal by an
angle of 10 degrees to facilitate use of the screen
Figure 3 Countertop Wedge: Rear View of the MX 800 Series Terminal
1
Align the pins in the countertop wedge with the two key holes on the bottom
of the MX 800 Series terminal
2
Slide the countertop wedge firmly into position.
Customer In Queue
Install so that customer
is between PED and
next in queue
Install so that customer
is between PED and
next in queue
(Figure
(Figure 4).
MX 800 S
Customers Elsewhere
No action needed
No action needed
3).
I G
ERIES NSTALLATION UIDE
11