Selecting A Location - Avaya Cajun P550R Installation Manual

Chapter 2

Selecting a Location

2-2
Power cords (one for each power supply)
Cable management bracket
10Base-T crossover cable (for connecting to Ethernet Console
Port)
Out-of-Band connection kit, including:
Male DCE-to-RJ-45 connector (connects to switch)
—
Female DTE-to-RJ-45 connector (connects to computer)
—
Male DTE-to-RJ-45 null modem connector (connects to a
—
modem)
Straight-through RJ-45 cable for connecting between
—
connectors
Product documentation
Options (as ordered)
Unpack the shipped items and report any lost or damaged items to
your shipping carrier or your Avaya representative.
The location you select for installing the system hardware must
meet the following requirements:
19-inch EIA-standard grounded rack or table, with rails, capable
of supporting at least 80 kg (182 lb) in a cantilevered
application (rails should not deflect or distort). A fully-loaded
P550R switch weighs 60 kg (130 lbs). A fully loaded P882
switch weighs 80 kg (182 lbs).
At least 2 inches (5.2 cm) on either side of the system, and from
the rear of the system, to allow adequate airflow through the
system (Figure 2-1).
Cajun P550R/P880/P882 Switch Installation Guide